PRODUCTS

SCE8000A

Enhanced To Lift More

TOP HIGHLIGHTS

+ Strong lifting capacities suitable for wind turbine installation with maximum tower height of 162 m
+ Fast set-up and disassembly via one-key erection of mast and self dis/assembly of crawler frames
+ Economical transport, meeting global transport standards
+ Optimal safety guaranteed by remote controlled operation and one-key adjustment of center of gravity
+ The average ground bearing pressure in wind power condition is reduced to 0.2MPa

Class

Lattice boom crawler crane

Engine

Cummins diesel engine

Operating mass

610,000 kg

Download
message
Email
BENEFITS & FEATURES

QUALITY

SCE8000A is a lattice boom crawler crane with 800t lifting capacity, boom length totaling 99m, and featuring stronger capacity yet reduced self-weight. Key components come from international name brands of reliable quality. Operator comfort is improved by brand new cab design.

DIMENSIONS

Typical configuration ZHJFJDB 165+12 Only 34 transport trailers needed with a width of 1.2m and a height of less than 4.4m The maximum transport weight of the basic machine is 47t with separation device of superstructure and lower structure.

USER EXPERIENCE

Quick response: start and stop within 0.5 s. Good inching performance: the winch can realize inching function with or without load (inching travel 25mm, which is only 3mm for 8 parts of line hook). Hydraulic control lever: meeting operation habits of the customers preferring the hydraulic control model.

SAFETY

Load moment indicator: Analytical mechanics is applied and moment limiter calculation system based on the hoisting mechanics model is established. Through online empty-load calibration, the rated accuracy can reach 0~5% to fully protect the hoisting operation. In case of overload, the system will automatically give an alarm to guarantee safety operation. Full hydraulic double-circuit brake system. Work area limit: swing and boom angle area limit Real-time grounding pressure

COMPONENTS

High end power and hydraulic components: Cummins engine, Bosch Rexroth winch , KAWASAKI pump and main valve.

ECONOMY

Self-disassembly counterweight saves labor cost and improves efficiency. Convenient operation and agile travel with fuel economy. Auto idle stop of engine can reduce the oil consumption by 10%. In high efficiency mode, the maximum operating speed can be achieved at low and medium speeds, with lower noise and fuel consumption
TECHNICAL SPECIFICATIONS
Max. lifting capacity 800 t    
Gross weight 610,000 Kg    
Engine model Cummins (EU Stage V)      
Max. engine power 447/1800 kW/rpm    
Max. engine torque 2542/1400 N.m/rpm    
Overall length 14600 mm    
Overall width 3400 mm    
Overall height 2640 mm    
Tail slewing radius   m    
Boom sections (Qty.)        
Boom +jib length 99+96 m    
Max. lifting moment 12000 t·m    
Max. lifting height   m  
STANDARD EQUIPMENT
› Novel operator’s cab with fashionable profile and nice interior. There are low and high-beam lights, back-view mirror, heater and A/C, radio and other functions. The layout of seat, handles, control buttons are designed with ergonomic principles to make operation more comfortable;
› It adopts highly intelligent moment indicator system to fully protect lifting operation and ensure accuracy, stability and comfort. SANY independently developed LMI, accuracy of 0 ~ 5%. › All-round safety protection, the main and auxiliary hoists are equipped with three-circle indicators and A2B switches to prevent over-hoist-down and over winding of the wire ropes.
› Adopt stable and high-quality main oil pump, enhancing system reliability. Precise parameter matching contributes to superior controllability of the vehicle.
› Lights – front , tail, boom, operation cab, alarm, rotary table, turning
›Independent travel driving units are adopted for each side of the crawler, to realize straight walking and turning driven by travel motor through gearbox and drive wheel.
› Model: Cummins Diesel engine,4-stroke, water-cooled, vertical in-line 6 cylinders, direct injection, turbo-charger, inter-cooler. › Emission standard: E5
› Boom: Lattice structure. The chord adopts high-strength structural tube and each section is connected through pins;Boom length: 99m. ›Fixed Jib: 12 m. ›Luffing Jib: 96 m. ›Power boom: 108m. ›Superlift mast: 42m.
RELATED PRODUCT

SY16C

Class Mini excavator
Engine Yanmar 3TNV80F
Operating mass 1 750 kg

SY18U

Net Power 14.6kw
Dig Depth 2385/2585 mm
Operating Weight 1925 kg

SY19E

Class Mini excavator
Engine Vmax
Operating mass 1 950 kg

SY35U

Class Mini Excavators
Engine Yanmar 3TNV88F
Operating mass 3 860 kg

Send us a message

  • Building First-Class Enterprises, Fostering First-Class Talents, And Making First -Class Contributions To Society.
Facebook Twitter Youtube Linkedin-in

Links

Sany Global

Sany Global

Contact

© 2023 Sany poland All Rights Reserved